K-Station | NovationMusic.com

K-Station

Artikel

There is a bar graph which is displayed next to a parameter name. When this bar graph occupies the most screen space the original value has been found. Alternatively turn the local control off. This...
The K Station is showing Packet Error on the screen to indicate that it has received a packet error during the data transmission. If this happens, the OS will not be uploaded into the K Station flash...
This is not a fault with the K-Station. The K-Station has an option in the global menu "< > Kill". If this is set to OFF, any notes which are played when the octave buttons are pressed will not...
To load soundbank into the K-station, you'll first need the following software: If you are on a PC, you'll need MIDI OX ( http://www.midiox.com/ ) If you are on a Mac, you'll need SysEx Libraian (...
The latest OS version for the K-Station is OS2.1.01. To check to see which version of OS is installed in a K-Station, power the K-Station up while holding down the number 5 button. The screen will...
Check the version of operating system installed in the K-Station (power the K-Station up while holding down the number 5 button). Update the operating system if this is not OS2.1.01.
This is in three parts. Firstly the factory OS needs to be reloaded and then the sound banks will have to be restored from ROM. Please note that it is unlikely that the factory OS should ever need to...
The sysex information can be found in Appendix A-8 of the K-Station manual, available to download from here .
Check the Clock Source (seventh page of the global menu). If this is set to "ext" for external, ensure that the K-Station is receiving MIDI clock. Check that the arp on LED is lit. See page 35 in the...
The local control has been turned off and the K-Station is not being used in a complete MIDI loop. Check the sixth page in the global menu. This must read Local Cntrol ON for the K-Station to respond...
If the vocoder is being used with a microphone double check that the input sensitivity has been switched from "LIN" (Line Level, the factory default) to "MIC". This is the correct sensitivity for a...
In the "env's" menu on the K Station, you can set the audio input to trigger the envelopes using the 'ENV Aud Trig' option. If you then increase the level of the external input in the mixer section...